This year’s Beijing Show is the first pulbic showing of the 661bhp V12 powered Ferrari 599 GTO, of which 599 are to be made – and are all sold out already. Surely a future classic in the making.

Mercedes are showing the CLS Shooting Break, which previews the new look of the replacement CLS, and VW has shown a facelifted Phaeton.

Porsche have shown for the first time the V6-powered Panamera luxury 4dr – making family Porsche motoring more accesible to the masses.

For the uber-rich, Mercedes has launched a facelifted range of Maybach limos, and at the other end of the scale, MG showed the first new small car in years – the Zero. Hopefully sales will be more than that.

Of course, it wouldn’t be a far-east motorshow without some true oddities, most of which seem to come from Japanese ‘car-art’ specialists (their words, not ours) Mitsuoka. It seems you can take just about any modern, good looking sports car or saloon, and turn it into a pastiche of 1940s ‘style’. We’ll let you decide on whether they’re successful or not:

This used to be a Ford Mustang:

And this is their bespoke Supercar, the Orochi. Worry not, we won’t be adding one to next month’s Supercar competition!

The 599XX replaced the FXX this year, and the programme runs along similar lines, with customers giving feedback to Ferrari engineers that is then used in the development of future road cars.

The Ferrari 599XX gets a retuned version of the 599′s V12 engine, with its rev limit boosted to 9000rpm and its weight reduced by the adoption of a new crankshaft and more extensive use of carbonfibre in ancillary parts. Ferrari says it “achieved its goal” of just under 700bhp at 9000rpm.

The power is transmitted through a new version of Ferrari’s robotised manual gearbox that features shift times of just 60ms. Ferrari claims that the 599XX can lap its Fiorano test track in 1m 17sec, less than a second off the time of the Enzo-based FXX that it will replace.

The most obvious external alterations to the regular 599 are a variety of carbonfibre additions, including a small roof spoiler, carbonfibre brake disc covers and a enormous carbonfibre undertray and rear diffuser.

Inside, the cabin has been stripped out to race specification, with a bare dashboard and carbonfibre cladding. It does feature a display screen, however; it’s used by Ferrari’s ‘virtual car engineer’, which provides instantaneous data on the vehicle’s efficiency.

The stock Enzo’s interior is normally all-business but Gemballa gave it some luxury by adding quilted black Alcantara to the seats, dash and door panels. Matching red stitching and floor piping look great. A touch-screen has been added to the dashboard, controlling in-car entertainment. It all looks wonderful without being over-done. If you felt like the Enzo was a little too raw, Gemballa has the solution.

While the Ferrari Enzo is exciting and legendary, it’s not beautiful. Hard-edged and bad-ass, yes, but even an S2000 would win the beauty contest. That makes it a great car for tasteful customization (it’s still a Ferrari) and Gemballa did a great job. Customizing exotic cars is happening, whether you think it’s right or not, so instead of crying “Why?!”, we should demand the best. If the car is faster, and still looks good, I give it a pass.

It’s not like an Enzo needs suspension mods, or more carbon fiber. If the Enzo was Tequila, to make it better you don’t add more Tequila. You add ice and lime juice, so you still get drunk and it tastes great. The Gemballa MIG-U1 is striking inside and out. It looks like someone bought a fighter jet, and then made it liveable inside for private trips. And you have to admit, that would be a pretty incredible way to travel.

As the hairpin bend unwinds, you start squeezing the throttle, and the engine note rises from a creamy bass growl to a screaming contralto howl, underlain by an increasingly fussy backbeat of cams and valve gear. It’s a delicious, utterly intoxicating engine noise. One that encourages you to use every last one of the 8500 revs that are on tap before you finger-flick the paddle shifter back and engage third gear, just like that…

Win the Stunning Ferrari F430 this month
To enter this month’s supercar competition and be in with a chance to win the truly desirable Ferrari F430, click below:

A new car from every point of view

The Ferrari 458 Italia is a completely new car from every point of view: engine, design, aerodynamics, handling, instrumentation and ergonomics, just to name a few.

A two-seater berlinetta, the Ferrari 458 Italia, as is now traditional for all Ferrari’s road-going cars, benefits hugely from the company’s Formula 1 experience. This is particularly evident in the speed and precision with which the car responds to driver inputs and in the attention focused on reducing internal friction in the engine for lower fuel consumption than the Ferrari F430, despite the fact that both overall displacement and power have increased.

Ferrari 458 Born on the Track

However, Ferrari’s track experience makes its presence felt in the Ferrari 458 Italia not only in terms of pure technological transfer but also on a more emotional level, because of the strong emphasis on creating an almost symbiotic relationship between driver and car.

The Ferrari 458 Italia features an innovative driving environment with a new kind of steering wheel and dashboard that is the direct result of racing practice. Once again input from Michael Schumacher – who was involved from the very start of the Ferrari 458 Italia project – played an invaluable part.

The package includes a modified set-up with stiffer springs and rear anti-roll bar as well as new calibration settings for the magnetorheological shock absorbers when the manettino is at its sportier settings. The ride height has also been lowered which in turn lowers the car’s centre of gravity. This combined with the new set-up helps improve body control. The package also includes specifically optimised tyres featuring a compound that offers even better grip.

The car’s electronics have also evolved to ensure even more prompt response to driver commands. The F1 gearbox’s shifts are now even faster in high-performance settings, while a new engine software strategy has improved accelerator response.

The exhaust silencer has also been modified with the result producing an even more marked and thrilling sound under hard usage whilst still delivering just the right comfort levels at cruising speed.

From a styling point of view, the package also includes some distinctively sporty exterior and interior features with carbon-fibre widely used in the latter. The 20″ split-rim wheels are new with a special diamond-cut and matte silver finish. The rear diffuser is finished in matte black to underscore the car’s new set-up and highlight the chromed tail pipes. The cabin is sportier too thanks to a sophisticated mix of full-grain leather, black Alcantara® and carbon-fibre trim.

The new seats are trimmed in a new two-tone combination of leather with black Alcantara® inserts, and the seat backs are trimmed entirely in carbon-fibre. Embroidered in contrasting stitching on the headrest are a Prancing Horse and the words “Handling GTE”.

This new car joins Ferrari’s 8-cylinder range which is made up mostly of very high performance models. It also flanks the 12-cylinder flagship Ferrari 612 Scaglietti in the Grand Tourer category. The Ferrari California is a car with the track in its DNA. It is enormously innovative and will more than fulfil the expectations of even our most discerning clients, offering breathtaking driving pleasure and fun behind the wheel as well as extreme versatility of use and in-car comfort. It is available exclusively as a convertible with retractable folding hard top in either a two-seater version with a traditional rear bench or in the 2+ version which sees the rear bench equipped with seating for one to two passengers.

In line with Ferrari tradition, this model positively brims with innovative features. In addition to its retractable hard top and the aforementioned original 2+ concept, the new Prancing Horse car also offers: a new direct injection V8 engine, a 7-speed gearbox with steering wheel-mounted F1-style paddles coupled with a new dual clutch, a new suspension system (double wishbones at the front and multilink at the rear), the new evolved F1-Trac traction control system and Brembo brakes with CCM (carbon ceramic material) discs as standard (this latter feature is shared by the other models in the current range).

Styling

The California’s sleek aerodynamic styling is, like the rest of the current Ferrari models, the result of our longstanding collaboration with Pininfarina and offers a host of signature Ferrari styling cues. Viewed from the side, the aerodynamic sweep of the bonnet beautifully contrasts with the compact tail volume and the pulled-back cabin. The front continues some of the themes hinted at on the flanks, harmoniously alternating concave and convex volumes. Seen head-on, the car clearly takes it much of its inspiration from the prestigious Prancing Horse car from which it takes its name: the grille and slender air intake at the centre of the bonnet most notably harking back to the 250 GT California. At the rear, the sides and the muscular tail section are both familiar too. As at the front, the single round LED taillights are inset directly along the edge of the boot. The California’s vertically stacked twin tailpipes are an original flourish as is the boot which sweeps right down to the bumpers to improve functionality. Of course, the interior also reflects the same level of design sophistication, exuding a sense of refined luxury, comfort and bespoke quality. Situated between the front seats, the new aluminium-trimmed centre console is another distinctive touch that goes beyond the merely aesthetic, beautifully combining functionality and design.

Aerodynamics

The Ferrari California’s aerodynamics were, of course, developed in tandem with its styling. This allowed Ferrari to keep the Cx (drag coefficient) right down with respect to the downforce required for optimal vehicle dynamics. In the coupé configuration, the Ferrari California has a Cx value of 0.32. A desire to achieve perfect balance between vertical load and drag influenced the shape of the rear diffuser and the spoiler incorporated into the front bumper. Drag has been cut to 10% lower than on the other Ferrari models which not only makes the Ferrari California a more aerodynamically efficient car but also reduces fuel consumption. Last but not least, the air intake on the bonnet ensures highly efficient cooling of the engine compartment.

The new 8-cylinder engine

This is the first V8 in the history of Ferrari road-cars to be mid-front mounted. Built entirely from aluminium, it retains the typical Ferrari architecture with a 90° angle between the two cylinder banks and a 180° angle between the cranks.

The engine has a total displacement of 4,300 cc and a maximum power output of 460 hp/338 kW at 7,750 rpm. With a specific power of 107 hp/litre, its maximum torque is 485 Nm (49 kgm) at 5,000 rpm, 75% of which is available at just 2,250 rpm. The Ferrari California takes less than 4 seconds to accelerate from 0 to 100 km/h and delivers a blistering 310 km/h top speed.

The new V8 features direct fuel injection and variable timing (on both intake and exhaust) to guarantee superb performance, exceptional handling and fuel consumption and emissions that easily comply with the toughest Euro 5 and Lev2 standards. Thanks in part to these solutions, the Ferrari California consumes just 13.1 litres/100 km (ECE combined) and has carbon emissions of 305.6 gkm (ECE combined).

The California’s engine sound was also carefully developed as this is one of the great Ferrari signatures and really does contribute to enhancing driving pleasure. Particular attention was lavished on sound perception in the cabin both with the top up and down to ensure that trademark thrill without compromising on occupant acoustic comfort.

Gearbox and transmission

The Ferrari California sports a new dual clutch gearbox (7-speed + reverse) with the now traditional steering wheel-mounted F1-style paddles. This is an innovative system that guarantees a superb combination of performance and ride comfort. With the dual clutch, one clutch is used for even-numbered gears and the other for odd-numbered ones, and allows the pre-selection of the next gear required.The gears are changed by overlapping the opening and closing stage of both clutches, resulting in gearshifting times that are close to zero and with no “torque interrupt”. The result is not only enhanced performance but truly thrilling driving pleasure. The traditional transaxle layout (engine to the front and gearbox to the rear) also contributes to the California’s perfect weight distribution (47% front – 53% rear) and to reducing vibration to the bodyshell. In manual mode, the new gearbox guarantees great sporty driving pleasure while extra comfort is assured in automatic.

Chassis and suspensions

The Ferrari California’s chassis and bodyshell are both made entirely from aluminium. Thanks to the use of different aluminium technologies (extrusions and shell casts), the car’s exceptional versatility, onboard comfort and driveability has not added to chassis weight or to the dimensions of the structural sections – something that simply would not be the case had traditional steel architecture and technologies been used. Furthermore, static rigidity (torsional and flexional) has been improved with respect to average figures for a Spider to ensure exceptional handling in any kind of road conditions and to guarantee GT-standard comfort both with the top up and down.

The Ferrari California retains the traditional double wishbone suspension to the front while a new multilink system has been specially developed for the rear. The multilink system improves longitudinal flexibility of the suspension, keeping transverse rigidity values high. What this means in practice is that the car beautifully absorbs any unevenness, and noise and vibration are efficiently damped for exceptional ride comfort well on a par with the car’s nimble handling. The SCM Magnetorheological Suspension Control System, debuted on the Ferrari 599 GTB Fiorano, is also available on request.
Retractable Hard Top

Of course the Ferrari California’s signature feature has to be its retractable hard top (RHT). It is made from aluminium panels and has a cast aluminium weight-bearing structure which has reduced its overall weight and the moving masses involved. The entire opening/closing cycle is completed in just 14 seconds and thanks to the original stowage system, the California’s boot space remains extremely generous regardless of whether it is up or down.

Particular attention was also paid to cutting the weight of the engine unit components. This was achieved both by optimising forms – as in the new crankshaft – and adopting exclusive materials, as in the carbon-fibre used for the intake plenums. A new gearbox shift strategy cuts overall gearchange times to 60 ms.

The Ferrari 599XX is characterised by an innovative electronic concept called the “High Performance Dynamic Concept” which has been designed to get the maximum performance from the car by managing the combination of the car’s mechanical limits with the potential of its electronic controls. The mechanical and electronic systems work together to get the maximum performance from the car under extreme high performance driving, for consistent lap times. The sporty handling has been improved thanks to the adoption of second generation SCM suspension system. Track usage is also made easier thanks to the new “virtual car engineer”, a screen in the car that provides a real-time indication of the vehicle’s efficiency.

The Ferrari 599XX’s aerodynamics were honed in numerous wind tunnel test sessions with the result that the car now boasts 280 kg of downforce at 200 km/h (630 kg at 300 km/h). The front underside of the body is completely faired-in and the vents that channel hot air from the engine bay have been moved to the bonnet.

The “ActiflowT” system increases downforce and/or cuts drag depending on the car’s trim cornering conditions, courtesy of the use of a porous material in the diffuser and two fans in the boot which channel the air flow from under the car out through two grilles next to the tail-lights. Winglets have been added to the rear buttresses to increase downforce. while synthetic jets have also been incorporated into the rear of the car to control and smooth the air flow and to reduce drag.

Ferrari’s engineers have also used F1-derived “doughnuts” which partly cover the brake discs and wheel rim. These have the dual function of improving both aerodynamics and brake cooling.

In terms of the bodywork, composites and carbon-fibre have been widely used and the engineers drew on their experience in working with aluminium to reach the weight target. The development of increasingly high-performance materials has also benefited the carbon-ceramic material braking system. The brake pads are now made from carbon-fibre which means that the calipers are smaller whilst guaranteeing the same efficiency. The new racing carbon ceramic braking system also delivers shorter braking distances and is generally more efficient due to the weight saving.

The Ferrari 599XX comes with slick tyres (29/67 R19 Front and 31/71 R19 Rear) specifically developed to maximise stability in cornering and increase lateral acceleration. They are fitted to 19 x 11J wheel rims at the front and 19 x 12J at the rear.

The package includes a modified set-up with stiffer springs and rear anti-roll bar as well as new calibration settings for the magnetorheological shock absorbers when the manettino is at its sportier settings. The ride height has also been lowered which in turn lowers the car’s centre of gravity. This combined with the new set-up helps improve body control. The package also includes specifically optimised tyres featuring a compound that offers even better grip.

The car’s electronics have also evolved to ensure even more prompt response to driver commands. The F1 gearbox’s shifts are now even faster in high-performance settings, while a new engine software strategy has improved accelerator response.

The exhaust silencer has also been modified with the result producing an even more marked and thrilling sound under hard usage whilst still delivering just the right comfort levels at cruising speed.

From a styling point of view, the package also includes some distinctively sporty exterior and interior features with carbon-fibre widely used in the latter. The 20″ split-rim wheels are new with a special diamond-cut and matte silver finish. The rear diffuser is finished in matte black to underscore the car’s new set-up and highlight the chromed tail pipes. The cabin is sportier too thanks to a sophisticated mix of full-grain leather, black Alcantara® and carbon-fibre trim.

The new seats are trimmed in a new two-tone combination of leather with black Alcantara® inserts, and the seat backs are trimmed entirely in carbon-fibre. Embroidered in contrasting stitching on the headrest are a Prancing Horse and the words “Handling GTE”.